AJMER PLANT

Established in 2015, the Building Material Division is located in Ajmer at the serene foothills of the Aravali mountain range. The facility spans 10,000 m² and includes a well-planned work floor, storage sheds, and an administrative building—all designed and constructed to operate in seamless synergy. The plant structure was engineered and fabricated by the globally renowned M/s FLSmidth, with all critical machinery and equipment sourced from industry leaders such as M-Tec, Siemens, Mettler Toledo, and FLS Ventomatic.

This dry-mix unit is a flexible, high-performance mixing tower designed for the production of dry mortar products, offering a capacity of up to 30 TPH. Its compact, vertical, and modular design ensures an energy-optimized material flow, significantly reducing process and operating costs. In line with its commitment to environmental harmony, the Building Material Division has developed extensive green areas with suitable plantation to aid in pollution control and enhance the micro-climate around the facility.

Plant control system (SCADA)

Manufacturing

IC-BMD plant automation is governed by Supervisory Control and Data Acquisition (SCADA). SCADA is a system of software and hardware elements that allows the operator to control and monitor manufacturing processes by directly interfacing with plant machinery and viewing real-time data. The operating system checks for availability of all relevant raw-material required for production and allows dosing at a pre-defined formulation. SCADA does not allow the plant to run if any irregularity is encountered. The flow of activity is only permitted if all pre-defined parameters are met, resulting in high precision.

Logic controlled operating system

Technology

The plant machinery is interconnected with programmable logic controllers. (PLCs) and remote terminal units (RTUs). PLCs and RTUs are microcomputers that communicate with plant machinery and perform desired actions with no scope of errors. PLCs and RTUs are supplied by Siemens AG, Germany.

Mixing system

Quality

Heart of the dry-mix plant is state-of-the-art plough and shear mixer manufactured by M-Tec Mathis Technik GMBH of Germany. Capacity of this mixer is 3.0 MT per batch. This mixer is having an axial shaft with mixing blades and four transverse choppers to mix even the smallest doses of additives uniformly in a batch of product by agitating the material in three dimensions.

This high efficiency mixer allows optimized batch timing and no cross contamination when changing the type of product to be mixed. All dosing conveyors are also manufactured and supplied by M-Tec with precision weighing systems by Mettler-Toledo of Switzerland.

Packer

Manufacturing

A six-spout pneumatic bag filling machine does the duty of filling the bags in various sizes. The packer is supplied by M/s FLS Ventomatic, a leading manufacturer of pneumatic bag filling machines. The packer is capable of keeping highly accurate tolerances without segregating the material of different densities. IC-BMD is among the very few manufacturers using pneumatic bag filling machines in dry-mix mortar industry. The packer only takes 20 seconds to complete a cycle and fill six bags.

QC and R&D Laboratory

Technology

Each and every raw material viz cement, sand, performance modifying additives are thoroughly tested as per prescribed standards before production, and every finished product undergoes quality checks before dispatch. The lab is fully equipped with equipment conforming to corresponding test procedures and international and Indian standards. List of equipment includes environment chamber to simulate humidity and temperature required for a particular test procedure, Compressive strength testing machines of 100kN and 500 kN, briquette mould test apparatus, water permeability test apparatus, cement autoclave, muffle furnace, laboratory oven and digital automatic Hobart mixer. Testing equipment is sourced from leading manufacturers like AIMIL India and Dyna Proceq (Switzerland), ensuring precise evaluation of product performance and adhesion strength.

Moisture-proof Packing System

Quality

The dry-mix mortars, are susceptible to damage if the bags come in contact with moisture or water as the moisture initiates hydration of cement, one of the key ingredients in manufacturing. Rejection of bags due to hydration of cement is a burning issue among dry-mix manufacturers. IC-BMD is the one and only manufacturer in India to double jacket the finished goods bags. The bags, after coming out of the packer are jacketed with transparent Laminated bags and heat sealed to eliminate any possibility of moisture/ water ingress while transport and storage in godowns. After double jacketing, the bags are fully encapsulated and can withstand direct contact with water.

Storage system

Manufacturing

High-capacity multi-level shelves are installed in storage shed to keep stock of finished goods. Electric reach truck does the duty of stacking and reclaiming the pallets from racks. Each pallets carries 1.25MT of finished goods. The storage shed is capable of holding up-to 500 MT of finished goods which can be extended to 800 MT in future. First-in-first-out system is followed while storing and dispatching the material to destinations. This helps in avoiding old stocks in the storage shed.

On-line loading system

Technology

With multi-layer stacking for storing finished goods, the plant is equipped with an on-line truck loader. This system enables quick loading and dispatch of goods immediately after the bags are discharged from the pneumatic packer. The truck loader is adjustable in reach and rake to stack the bags in every corner of loading area of the truck. This automated truck loader reduces time and manpower requirements significantly.